-System Information- | Processor | Zhaoxin E KX-6000 series
KX- 6640A 4core 2.6 GHz BGA CPU TDP 35W
KX- 6640MA 4core 2.2 GHz BGA CPU TDP 25W
| System Memory | 2 x 260-Pin DDR4 2666MHz SO-DIMM, supports 8G/16G & up to 32GB (Non-ECC) | I/O Chipset | I/O extended IC ZX-200 (optional) | BIOS Information | AMI BIOS, 64 Mbit SPI Flash ROM
(Not support BIOS Boot Selection (BIOS_DIS0#, BIOS_DIS1#) | Watchdog Timer | H/W Reset, 1sec. ~ 65535sec. and 1sec./step | H/W Status Monitor | Monitoring System Temperature, Voltage and FAN Status with Auto Throttling Control | TPM | TCM (Nations IC-Z32H330TC-SQN-611) Optional,support under Linux and from Windows 10 RS3 version | I/O | USB Port | Max. 6 x USB 2.0
(*Up to Max. 8 x USB 2.0 only on models KX- 6640A & KX- 6640MA with ZX-200)
Max. 2 x USB3.0
(*Up to Max. 4 x USB3.0 Gen.1 (5 Gbps) only on models KX- 6640A & KX- 6640MA with ZX-200) | SMBus | SMBus | SATA | Max.2x SATAIII 6.0Gb/s
(*Max. 4 x SATAIII 6.0Gb/s (when KX- 6640A+ ZX-200 & KX- 6640MA+ ZX-200)
| DIO | 8bit GPIO, WDG/HW monitor/FAN | UART | 2 x UART(2-wire) | PCIe | KX- 6640A
Configuration1:5PCIEX1+1PCIEX8 (default)
Configuration2:5PCIEX1+2PCIEX4
Configuration3:1PCIEX1+1PCIEX4+1PCIEX8
Configuration4:1PCIEX1+3PCIEX4
Configuration5:3PCIEX1+1PCIEX2+1PCIEX8
KX- 6640MA (CPU TDP will change from 25W to 26W when use PCIex8)
Configuration1:5PCIEX1+1PCIEX4 (default)
Configuration2:1PCIEX1+1PCIEX4+2PCIEX4
Configuration3:3PCIEX1+1PCIEX2+1PCIEX4
KX- 6640A+ZX200
Configuration1:4PCIEX1(Gen2) (default)
Configuration2:1PCIEX4 (Gen2)
KX- 6640MA+ZX200
Configuration1:4PCIEX1(Gen2) (default)
Configuration2:1PCIEX4 (Gen2)
| Other | LPC, I2C | Display | Graphic Chipset | N/A | Spec. & Resolution | HDMI 2.0: 4096 x 2160 @ 60Hz (only 3840x2160@60Hz is tested, 4096 x 2160 @ 60Hz needs to be further validated when device is available)
DP 1.2a: 4096 x 2304 @60Hz, (only 3840 x 2160@60Hz is tested, 4096 x 2160 @ 60Hz needs to be further validated when device is available)
LVDS (via eDP-to-LVDS 7511 IC): 1920x1080 @60Hz, Dual-channel 18/24-bit
VGA: 1920x1080 @60Hz
| Multiple Display | Supporting 3 display (2 display with clone mode, 1 display with extend mode)
LVDS (HDMI or DP) + VGA + DDI (HDMI or DP)
| Digital Display Interface | HDMI/DP | Audio | Audio Codec | Zhaoxin HD audio I/F | Ethernet | LAN Chipset | 1xIntel 210AT Gigabit Ethernet
| Mechanical & Environmental | Operating Temperature | 0 ~ 60 °C (32 ~ 140 °F), with airflow 0.5m/s
| Storage Temperature | -40°C ~ 75°C (-40°F ~ 167°F) | Operating Humidity | 40°C @ 95% Relative Humidity, Non-condensing | Weight | 0.44lbs (0.2kg) | Power Requirement | +9~ +19V | ACPI | Single power ATX Support S0, S3, S5
ACPI 5.0 Compliant | Power Mode | AT/ATX | Dimension (L x W) | 125 x 95 mm (3.74” x 4.92”) | Software Support | OS Information | Microsoft® Windows 10 64-bit/Windows 7
Linux (NeoKylin DT V7.0), Ubuntu 16.04.5
| Ordering Information | Ordering Information | ESM-ZXE-6640A-A1R Zhaoxin COM Express Module Type 6 on board KX-6640A CPU (0~+60 degrees), without TCM ESM-ZXE-6640MA-A1R Zhaoxin COM Express Module Type 6 on board KX-6640MA CPU (0~+60 degrees),without TCM ESM-ZXE-40AZ-A1R Zhaoxin COM Express Module Type 6 on board KX-6640A CPU+ZX-200 (0~+60 degrees),without TCM ESM-ZXE-40MAZ-A1R Zhaoxin COM Express Module Type 6 on board KX-6640MA CPU+ZX-200 (0~+60 degrees),without TCM EEV-EX16-A1R mATX Ev. Board for COMe Type 6 A1 ACC-ESMZXE-CL-1R Cooler for ESM-ZXE W/FAN H=61mm ACC-ESMZXE-CL-2R Cooler for ESM-ZXE W/FAN H=61mm with pad for board with ZX-200
ACC-ESMZXE-SD-1R Heatspreader for ESM-ZXE H=8 mm
ACC-ESMZXE-SD-2R Heatspreader for ESM-ZXE H=8 mm with pad for board with ZX-200 |
|