EMX-IMX7
EMX-IMX7

Reflective electrophoretic display system board

  • NXP i.MX 7 Dual Processor
  • Dual ARM® Cortex®-A7 Cores And Cortex-M4
  • 1GB DDR3L On-Board or optional 2GB
  • 8GB eMMC On-Board
  • 1 x RJ-45 port supports Gigabit LAN
  • 2 x 50pins connector for E INK display
  • 2 x USB 2.0 (Edge I/O)
  • 4 x USB 2.0 (Internal)
  • 1 x Micro USB for USB OTG
  • 1 x Micro SD card slot
  • 1 x M.2 E-Key Socket for WiFi/BT module expansion
  • 2 x 0.5W Speakers out connectors
  • +
    Spec
    .-System Information-
     Processor
    NXP i.MX 7 Dual Processor
    Dual ARM® Cortex®-A7 Cores And Cortex-M4
     System Memory
    1GB DDR3L On-Board or optional 2GB
    .Storage
     Storage
    8GB eMMC On-Board
    .External I/O
     USB Port
    1 x dual stack USB connector for two USB 2.0
     LAN Port
    1 x RJ-45 port supports Gigabit LAN
    .I/O
     USB Port
    4 x USB 2.0 ports (Wafer 5Px2 B-W 2.0)
     GPIO
    One 1 x 12-pin wafer for 8 bit GPIO
     CMOS Battery
    1 x CR-2032/3.0V
     UART
    Two 1 x 4-pin wafer for Cortex-A7&Cortex-M4 debug
     Other
    1 x Micro SD card slot
    1 x M.2 E-Key Socket for WiFi/BT module expansion
    Four 1x5-pin wafers for I2C
    .DC In / Out Connector
     Input Power Connector
    1 x Lockable DC Jack
    .DC In/Out Characteristics
     Power Type
    DC IN
     Working Voltage
    12V/5A
    .Display
     Digital Display Interface
    Parallel Data , 2 x 50pins Connector
    .Mechanical
     Power Type
    DC IN, 12V/5A
     Weight
    0.35kg
    .Audio
     Speaker Output
    Two 1x2-pin wafers for Speaker Left/Right
    .Certifications
     Certification Information
    CE Class B
    FCC Class B
    .Ethernet
     Ethernet Interface
    Support 10/100/1000 Base-Tx
     LAN Port
    1 x RJ45
    .Power Requirement
     DC Input
    12V/5A
     DC Input Connector
    1 x Lockable DC Jack
     Power Mode
    AT Mode
     Power Type
    DC IN
    .Mechanical & Environmental
     Operating Temperature
    -10°C ~ 60°C (w/eMMC on board) ambient with air flow
     Storage Temperature
    -20°C ~ 70°C
     Operating Humidity
    40°C @ 95% Relative Humidity, Non-condensing
     Weight
    0.35kg
     Power Requirement
    DC IN, 12V/5A
     Power Mode
    AT Mode
     Power Connector
    1 x Lockable DC Jack
     Dimension (L x W)
    170mm x 170mm
     Input Voltage
    12V
     Input Current
    5A
    .Software Support
     OS Information
    Linux Yocto/Android 5.1
    .Ordering Information
     Ordering Information
    EMX-IMX7-A1R : EMX-IMX7 main board w/ 1G RAM, 8GB eMMC, GbE, USB, 12V DC-in, 1 Micro SD, 1 Micro USB, 1 M.2 E-Key support WiFi module
    EMX-IMX7-A2R : EMX-IMX7 main board w/ 2G RAM, 8GB eMMC, GbE, USB, 12V DC-in, 1 Micro SD, 1 Micro USB, 1 M.2 E-Key support WiFi module