Intel® Pentium®/Celeron®/Atom™ Processor Fanless Vehicle Telematics System

  • Intel® Pentium®/Celeron®/Atom™  Processor
  • One 204-pin SODIMM Socket Up to 8GB DDR3L 1866MHz SDRAM
  • Rich I/O, 1 DP, 1 LVDS, 1 DC-Out, 1 8-bit GPIO, 1 M.2 SSD, 1 SD Card, 1 2.5" Swappable Drive Bay, 2 Line-out, 2 Mic-in, 2 LAN, 2 COM, 4 USB, 5 Antenna Mounting
  • Onboard u-box M8N concurrent GNS module (GPS/QZSS, GLONASS, BeiDou)
  • Rugged Fanless Design Compliant with MIL-STD-810G
  • Power Management and Low Voltage Protection Design
  • Wake on RTC/SMS Via WWAN Module
  • Optional CAN modules supports OBD II, SAE J1939 or J1708
  • Wide Range DC Power Input from 9 ~ 36V
  • Fanless Operating from -20/40 ~ 70°C
  • Supports TPM 1.2/2.0 (Factory Option), SD card(SD 3.0)
  • +
    .System Information
    Intel® Pentium® Processor N4200 (2M Cache, up to 2.5 GHz)
    Intel® Celeron® Processor N3350 (2M Cache, up to 2.4 GHz)
    Intel® Celeron® Processor J3455 (2M Cache, up to 2.3 GHz)
    Intel Atom® x7-E3950 Processor (2M Cache, up to 2.00 GHz)
    Intel Atom® x5-E3940 Processor (2M Cache, up to 1.80 GHz)
    Intel Atom® x5-E3930 Processor (2M Cache, up to 1.80 GHz)
     System Memory
    1 x 204-Pin DDR3L 1866MHz SO-DIMM up to 8 GB
     Watchdog Timer
    H/W Reset, 1sec. ~ 65535sec.
     H/W Status Monitor
    Monitoring CPU & System Temperature and Voltage
    1 x Avalue 80-Pin IET Interface
    2 x Full Size Mini PCIe (w/ SIM Slot)
    1 x CANBus module Interface (UART)
    1 x M.2 (2242/3042) B-Key (SATA)
    1 x 2.5" Drive Bay (SATA III)
    1 x M.2 (SATA III)
    1 x SD (3.0)
     USB Port
    4 x USB 3.0
     COM Port
    2 x RS-232/422/485 (Jumper)
    1 x 8-Bit GPIO
    (Digital Input)
    Input Voltage (Internal Type): 5VDC TTL (default)
    Input Voltage (Source Type): 0~30 VDC
    (Digital Output)
    Digital Output (Sink Type): 5VDC TTL (default), max current: 20mA
    Digital Output (Source Type): 0~30VDC, max current: 250mA
     CAN Bus
    CANbus modules supports OBDII, SAE J1939/J1708 (Factory Option)
     SIM Slot
    2 x SIM Card Slot (External Accessible)
    5 x Antenna Mounting with Dust Cover
    Onboard u-blox NEO-M8N module supports GPS/ Gloness/ QZSS/ Galileo/ Beidou
    Industry leading –167 dBm navigation sensitivityProduct variants to meet performance and cost requirementsCombines low power consumption and high sensitivity
     Graphic Chipset
    Processor Graphics
    Intel® HD Graphics 505 (N4200, E3950)
    Intel® HD Graphics 500 (E3950, E3940, E3930)
     Spec. & Resolution
    DP: Max. Resolution 4096x2160 @ 60Hz
    LVDS: Max. Resolution 1920x1200 @ 60Hz
     Multiple Display
    Dual Display
     Audio Codec
    Realtek ALC888S
    supports 2.1-CH
     Audio Interface
    2 x Mic-In, 2 x Line-Out
     Certification Information
    CE, FCC Class B, e13 Mark, ISO7637-2, IP50 Rating
     LAN Chipset
    2 x Intel® I211AT
     Ethernet Interface
    10/100/1000 Base-Tx GbE compatible
     LAN Port
    2 x RJ-45
    .Power Requirement
     DC Input
    Typical 12/24 Vdc ( +9~ 36V )
     DC Input Connector
    3-Pin Terminal Block
     DC Output
     DC Output Connector
    2-Pin Terminal Block
    Single Power ATX Support S0, S3, S4, S5
    ACPI 5.0 Compliant
     Power Mode
    Vehicle Power Mode (Default Setting)
    Industrial PC Power Mode supports AT/ATX
    .Mechanical & Environmental
     Operating Temperature
    N4200/ N3350/J3455
    With extended temperature peripherals: -20°C ~ 70°C (-4°F ~ 158°F) with air flow
    E3950/ E3940/ E3930
    With extended temperature peripherals: -40°C ~ 70°C (-40°F ~ 158°F) with air flow
     Storage Temperature
    -40°C ~ 85°C (-40°F ~ 185°F)
     Operating Humidity
    40°C @ 95% Relative Humidity, Non-condensing
     Dimension (W x L x H)
    9.45” x 7.3” x 2.44” (239mm x 186mm x 62mm)
    2.6kg (system)
    3.2kg (w/package)
     Vibration Test
    Operating with SSD : MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
    Storage with SSD : MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
     Shock Test
    Operating with SSD : MIL-STD-810G, Method 516.6, Procedure I, functional shock=20G
    Non-Operating with SSD : MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75G
     Mounting Kit
    Wall Mount kit (Standard)
    Aluminum + Metal
    .Software Support
     OS Information
    Win 10, Linux
    Android (by request)
    .Ordering Information
     Ordering Information
    Intel® Pentium® Processor N4200 Fanless Vehicle Telematics System

    Intel® Celeron® Processor N3350 Fanless Vehicle Telematics System

    Intel® Celeron® Processor J3455 Fanless Vehicle Telematics System

    Intel® Celeron® Processor E3950 Fanless Vehicle Telematics System

    Intel® Celeron® Processor E3940 Fanless Vehicle Telematics System

    Intel® Celeron® Processor E3930 Fanless Vehicle Telematics System