ESM-ZXE
ESM-ZXE

PICMG COM R3.0 Type 6 module with Zhaoxin E KX-6000 series 4 core BGA CPU

  • Zhaoxin E KX-6000 series 4 core BGA CPU Up to 35W Max
  • Two 260-pin SODIMM DDR4 2666 SDRAM slot up to 32GB
  • Support Dual Channel LVDS, Display Port, HDMI, VGA
  • Flexible I/O up to 4 SATAIII (6.0GB/s), 4 USB 3.0, 8 USB 2.0, 8-bit GPIO,5 PCIex1, 1 PCIex8
  • HD Audio Interface
  • 9~19V Wide Range Power Input
  • Intel 210AT Gigabit Ethernet
  • Type 6 Rev 3.0 Pin-out
  • Support TCM (Optional)
  • +
    Spec
    .System
     Processor
    Zhaoxin E KX-6000 series
    KX- 6640A 4core 2.6 GHz BGA CPU TDP 35W
    KX- 6640MA 4core 2.2 GHz BGA CPU TDP 25W
     Memory
    2 x 260-Pin DDR4 2666MHz SO-DIMM, supports 8G/16G & up to 32GB (Non-ECC)
     I/O Chip
    I/O extended IC ZX-200 (optional)
     BIOS
    AMI BIOS, 64 Mbit SPI Flash ROM
    (Not support BIOS Boot Selection (BIOS_DIS0#, BIOS_DIS1#)
     Watchdog Timer
    H/W Reset, 1sec. ~ 65535sec. and 1sec./step
     H/W Status Monitor
    Monitoring System Temperature, Voltage and FAN Status with Auto Throttling Control
     TPM
    TCM (Nations IC-Z32H330TC-SQN-611) Optional,support under Linux and from Windows 10 RS3 version
    .I/O
     USB Port
    Max. 6 x USB 2.0
    (*Up to Max. 8 x USB 2.0 only on models KX- 6640A & KX- 6640MA with ZX-200)
    Max. 2 x USB3.0
    (*Up to Max. 4 x USB3.0 Gen.1 (5 Gbps) only on models KX- 6640A & KX- 6640MA with ZX-200)
     SATA
    Max.2x SATAIII 6.0Gb/s
    (*Max. 4 x SATAIII 6.0Gb/s (when KX- 6640A+ ZX-200 & KX- 6640MA+ ZX-200)
     DIO
    8bit GPIO, WDG/HW monitor/FAN
     SMBus
    SMBus
     UART
    2 x UART(2-wire)
     PCIe
    KX- 6640A
    Configuration1:5PCIEX1+1PCIEX8 (default)
    Configuration2:5PCIEX1+2PCIEX4
    Configuration3:1PCIEX1+1PCIEX4+1PCIEX8
    Configuration4:1PCIEX1+3PCIEX4
    Configuration5:3PCIEX1+1PCIEX2+1PCIEX8
    KX- 6640MA (CPU TDP will change from 25W to 26W when use PCIex8)
    Configuration1:5PCIEX1+1PCIEX8 (default)
    Configuration2:1PCIEX1+1PCIEX4+1PCIEX8
    Configuration3:3PCIEX1+1PCIEX2+1PCIEX8
    KX- 6640A+ZX200
    Configuration1:4PCIEX1(Gen2) (default)
    Configuration2:1PCIEX4 (Gen2)
    KX- 6640MA+ZX200
    Configuration1:4PCIEX1(Gen2) (default)
    Configuration2:1PCIEX4 (Gen2)
     Other
    LPC, I2C
    .Display
     Chipset
    N/A
     Resolution
    HDMI 2.0: 4096 x 2160 @ 60Hz (only 3840x2160@60Hz is tested, 4096 x 2160 @ 60Hz needs to be further validated when device is available)
    DP 1.2a: 4096 x 2304 @60Hz, (only 3840 x 2160@60Hz is tested, 4096 x 2160 @ 60Hz needs to be further validated when device is available)
    LVDS (via eDP-to-LVDS 7511 IC): 1920x1080 @60Hz, Dual-channel 18/24-bit
    VGA: 1920x1080 @60Hz
     Multiple Display
    Supporting 3 display (2 display with clone mode, 1 display with extend mode)
    LVDS (HDMI or DP) + VGA + DDI (HDMI or DP)
     Digital Display Interface
    HDMI/DP
    .Audio
     Audio Codec
    Zhaoxin HD audio I/F
    .Ethernet
     Chipset
    1xIntel 210AT Gigabit Ethernet
    .Mechanical & Environmental
     Power Requirement
    +9~ +19V
     ACPI
    Single power ATX Support S0, S3, S5
    ACPI 5.0 Compliant
     Power Mode
    AT/ATX
     Operating Temperature
    0 ~ 60 °C (32 ~ 140 °F), with airflow 0.5m/s
    Extended temp.(Optional), -40 ~+60 °C (-40 ~ 140 °F)
     Storage Temperature
    -40°C ~ 75°C (-40°F ~ 167°F)
     Operating Humidity
    40°C @ 95% Relative Humidity, Non-condensing
     Dimension (L x W)
    125 x 95 mm (3.74” x 4.92”)
     Weight
    0.44lbs (0.2kg)
    .Software Support
     OS Information
    Microsoft® Windows 10 64-bit/Windows 7
    Linux (NeoKylin DT V7.0), Ubuntu 16.04.5
    +
    Ordering

    ESM-ZXE-6640A-A1R

    Zhaoxin COM Express Module Type 6 on board KX-6640A CPU (0~+60 degrees), without TCM

     

    ESM-ZXE-6640MA-A1R

    Zhaoxin COM Express Module Type 6 on board KX-6640MA CPU (0~+60 degrees),without TCM
     

    ESM-ZXE-40AZ-A1R

    Zhaoxin COM Express Module Type 6 on board KX-6640A CPU+ZX-200 (0~+60 degrees),without TCM

     

    ESM-ZXE-40MAZ-A1R

    Zhaoxin COM Express Module Type 6 on board KX-6640MA CPU+ZX-200 (0~+60 degrees),without TCM

     

    EEV-EX16-B1R
    mATX Ev. Board for COMe Type 6 A1

     

    ACC-ESMZXE-CL-1R

    Cooler for ESM-ZXE  W/FAN H=61mm

     

    ACC-ESMZXE-CL-2R

    Cooler for ESM-ZXE  W/FAN H=61mm with pad for board with ZX-200

    ACC-ESMZXE-SD-1R
    Heatspreader for ESM-ZXE H=13 mm

    ACC-ESMZXE-SD-2R
    Heatspreader for ESM-ZXE H=13 mm  with pad for board with ZX-200