REV-SA01
REV-SA01

3.5 inch SMARC specification compliant

  • 3.5” SBC Form Factor
  • Accept Avalue and Other SMARC Compatible
  • CPU Modules. (82 x 50mm)
  • HDMI, LVDS, VGA
  • Audio Interface
  • 1 x Mini-PCIe + SIM Socket
  • 2 x CAN BUS
  • 2 x Gigabit LAN
  • 4 x RS-232, 3 x USB
  • 1 x SD Socket
  • 1 x SATA
  • 1 x I2C RTC
  • On-board Accelerometer (MMA8451)
  • On-board Battery Charger Support 7.4V/2 Cell Li Battery
  • +
    Spec
    .I/O
     USB
    2 x USB Type A
    1 x USB 2.0 (1 x 5 Pitch 2.0mmHeader)
     MIO
    4 x 4 x RS-232 (TX/RX Only)
     External I/O Connector
    1 x HDMI
    1 x VGA
    2 x RJ45
    1 x DB9
    1 x Mini-USB
    2 x USB Type A
     Internal I/O Connector
    1 x LVDS Connector (24-bit Single-channel)
    1 x Backlight Connector
    1 x SD Socket
    1 x USB Connector
    2 x CAN BUS Connector
    1 x Speaker-out/Mic-in
    1 x RS-232 Connector
    1 x GPIO Connector
    1 x RTC Battery Connector
    1 x 2 Cell Li Battery Connector
    1 x SATA Connector
    .Audio
     Chipset
    Wolfson WM8962
     Audio Interface
    Mic-in, Speaker-out
    .Mechanical & Environmental
     Power Requirement
    +9V ~ 36V DC-in (REV-SA01-02-A1R)
    +9V ~ 24V DC-in (REV-SA01-03-A1R)
     Power Type
    AT
     Operating Temperature
    0°C ~ 60°C (32°F ~ 140°F)
     Storage Temperature
    -20°C ~ 80°C (-40°F ~ 176°F)
     Operating Humidity
    0% ~ 90% Relative Humidity, Non-condensing
     Dimension (L x W)
    146mm x 101mm (3.5” SBC Form Factor)
     Weight
    0.13kg
    .Certifications
     Certification Information
    CE
    FCC Class B
    +
    Ordering
    REV-SA01-03-A1R
    3.5"SMARC Carrier Board full function A1

    REV-SA01-02-A1R
    3.5"SMARC Carrier Board (A1)

    BCC-WLAN-04R
    Wi-Fi 802.11a/b/g/n/ac + Bluetooth4.1 Module with PCI-e Half-Mini Card