-System Information- |
Processor | NXP i.MX 7 Dual Processor
Dual ARM® Cortex®-A7 Cores And Cortex-M4 |
System Memory | 1GB DDR3L On-Board or optional 2GB |
Storage |
Storage | 8GB eMMC On-Board |
I/O |
USB Port | 4 x USB 2.0 ports (Wafer 5Px2 B-W 2.0) |
Other | 1 x Micro SD card slot
1 x M.2 E-Key Socket for WiFi/BT module expansion
Four 1x5-pin wafers for I2C |
GPIO | One 1 x 12-pin wafer for 8 bit GPIO |
UART | Two 1 x 4-pin wafer for Cortex-A7&Cortex-M4 debug |
CMOS Battery | 1 x CR-2032/3.0V |
Display |
Digital Display Interface | Parallel Data , 2 x 50pins Connector |
Audio |
Speaker Output | Two 1x2-pin wafers for Speaker Left/Right |
Ethernet |
Ethernet Interface | Support 10/100/1000 Base-Tx |
LAN Port | 1 x RJ45 |
Mechanical & Environmental |
Power Requirement | DC IN, 12V/5A |
Power Mode | AT Mode |
Operating Temperature | -10°C ~ 60°C (w/eMMC on board) ambient with air flow |
Storage Temperature | -20°C ~ 70°C |
Operating Humidity | 40°C @ 95% Relative Humidity, Non-condensing |
Dimension (L x W) | 170mm x 170mm |
Weight | 0.35kg |
Input Voltage | 12V |
Input Current | 5A |
Power Connector | 1 x Lockable DC Jack |
Certifications |
Certification Information | CE Class B
FCC Class B |
Software Support |
OS Information | Linux Yocto/Android 5.1 |
Ordering Information |
Ordering Information | EMX-IMX7-A1R : EMX-IMX7 main board w/ 1G RAM, 8GB eMMC, GbE, USB, 12V DC-in, 1 Micro SD, 1 Micro USB, 1 M.2 E-Key support WiFi module
EMX-IMX7-A2R : EMX-IMX7 main board w/ 2G RAM, 8GB eMMC, GbE, USB, 12V DC-in, 1 Micro SD, 1 Micro USB, 1 M.2 E-Key support WiFi module |
Power Requirement |
DC Input Connector | 1 x Lockable DC Jack |
DC Input | 12V/5A |
Power Mode | AT Mode |
Power Type | DC IN |
DC In/Out Characteristics |
Power Type | DC IN |
Working Voltage | 12V/5A |
DC In / Out Connector |
Input Power Connector | 1 x Lockable DC Jack |
External I/O |
LAN Port | 1 x RJ-45 port supports Gigabit LAN |
USB Port | 1 x dual stack USB connector for two USB 2.0 |
Mechanical |
Power Type | DC IN, 12V/5A |
Weight | 0.35kg |